23
○
A
Passing Light Button
When pushing the passing light button
, the high beam indicator light goes on to signal the driver of
the vehicle ahead that you are about to pass. The passing light is shut off as soon as the button is
released.
○
B
Dimmer Switch
High and low beam can be selected with this switch. When the headlight is on high beam
, the high
beam indicator light goes on (page 10).
High beam
Low beam
○
C
Menu Switch
The menu buttons are used to control the TFT display on the combination instrument. Please refer to page
11.
○
D
Turn Signal Switch
When the turn signal switch is turned to the left
or right
, the corresponding turn signals blink on and
off. To stop blinking, push the switch in.
○
E
Horn Button
When the horn button is pushed when the ignition switch is turned on; the horn sounds.
Front/Rear Brake Lever
This scooter is equipped with four-position adjustable front/rear brake levers for fitting different hand sizes.
To adjust the brake levers, do the below steps:
Push the brake lever forward
○
a
.
Turn the adjuster
○
A
until the number (position) aligns with the indicative mark
○
B
while pushing the
lever forward.
Release the brake lever and check that the lever operates correctly.
○
A
○
B
○
a
