14
○
C
Turn Signal Switch
When the turn signal switch is turned to the left
or right
, the corresponding turn signals blink on
and off. To stop blinking, push the switch in.
○
D
Horn Button
When the horn button is pushed when the ignition switch is turned on; the horn sounds.
○
E
Hazard Warning Switch
(Model with this equipment)
Push the switch to
position with the ignition switch in
“On” position. All the turn signal lights and turn
signal indicators will blink.
○
F
TCS Button
(LW30W2-EU only)
This scooter is equipped with traction control system (TCS). The traction control system can be turned
off/on by pushing this button for approximately 3 seconds.
Windscreen
This scooter is equipped with a 2-position adjustable windscreen. Adjust the positions to fit your figure.
High position:
○
A
Low position:
○
B
Remove the 2 screws
○
C
to remove the 2 windscreen garnishes
○
D
.
Remove the 4 flange bolts; select a position that you prefer and mount the windscreen.
Install the 2 garnishes.
NOTE :
Do not use the hazard lights for a long period of time, or the battery may become totally discharged.
If you turn the ignition switch off without deactivating the hazard lights, the hazard lights cannot be
deactivated unless you turn the ignition switch on.
○
A
○
B
○
C
○
D
○
E
○
A
○
B
