Sym Fiddle II 50 SYM Series, Руководство пользователя

Страница: 19 / 25

18
§
TIRE INSPECTION
§
y
Tires should be checked and inflated with the engine shut off.
y
If a tire’s ground contacting curve is abnormal, check it with an air pressure gauge and inflate it to
the specified pressure.
y
Tires pressure must be checked with an air pressure gauge when cold.
y
Visual check tires for frontal and lateral side walls for
crack or damage.
y
Visual check tires for any nails or small stones
wedged in the tread.
y
Check the “tread wear indicator” condition to see if
tread groove depth is insufficient.
y
A tire with a wear bar showing is worn out and should
be replaced immediately.
§
STEERING HANDLE FRONT SHOCK ABSORBERS INSPECTION
§
y
Perform this check with engine shut off and ignition switch key
removed.
y
Visual check front shock absorbers for damage.
y
Operate steering handle up and down, and check front shock
absorbers for noises due to bends.
y
Check the bolts and nuts of front shock absorbers with
wrenches for tightness.
y
Shake steering handle up & down, left & right, and front & rear
to check if it is loosen, has too much resistance and pulls to
one side.
y
Check steering handle if it is being pulled too tight by the
brake cables.
y
Take your scooter to SYM Authorized Dealer or Franchised
Dealer for a check or adjustment if any abnormal conditions
are found.
PLEASE REFER TO SPECIFICATIONS FOR STANDARD TIRE PRESSURE
CAUTION:
y
Abnormal tire pressure, wear, or crack is the most important cause that results in the loss
control of the steering handle and a punctured tire(s).
Tread wear
indicator
Crack and
damage
Foreign materials
(nails or small
stones)