manualshive.com logo in svg

Sym DD 50, Руководство по обслуживанию

Поделиться
Скачать
Sym DD 50 Скачать руководство пользователя страница 132

 

13. STEERING/FRONT WHEEL/SUSPENSION

 

13-9

 

 

Front Fork 

Removal 

y

 Handle  

y

 Front wheel 

y

 Front shock absorber 

Remove the steering stem mounting nut. 

Remove top cone race and front fork. 

 Caution 

Place the steel ball onto a parts container to 
prevent from missing.

 

 

Slightly tap the top and bottom ball bearing seats 

with a plastic hammer to remove the seats. 

Remove bottom cone race body with a punch. 

 Caution 

Do not damage the steering stem.

 

 

Installation 

Install a new bottom cone race onto the steering 

stem. 

Push the cone race until to mounted position. 

 Caution 

Do not tilt the ball bearing seats as installation.

 

Apply with grease onto the ball bearing seats, 

and install steel balls onto the seats. 

(Top: 26 balls, bottom: 29 balls) 

 

 

 

Lubricate the top cone race seat with grease. 

Screw the cone race in to top ball bearing seat till 

touching, and then screw out the cane race 

1/4~3/8 turns. 

Torque value: 0.25kgf-m 

 Caution 

Check the steering stem that should be rotated 
freely and no clearance in vertical direction.

 

 

 

 

 

 

 

Steering stem 
mounting nut 

Steering stem mounting nut 

Top cone race   

Bottom cone race

Steering lock nut

Top cone-race 

Steel balls

Top cone race 

Top ball 
bearing seat 

Bottom ball 
bearing seat 

Return 1/2 turns 

Locking to 
1/4~3/8 turns

This chapter Contents 

Содержание DD 50






























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды