Sylvania SYL-08PE, Руководство пользователя

Страница: 7 / 19

6
AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the control panel and remote controller
and all its functions, then follow the symbol for the functions you desire.
The unit can be controlled by the unit control panel alone or with the remote controller .
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Fig.4
NOTE: This manual does not include Remote Controller Operations, see the <<Remote
Controller Instruction>> packed with the unit for details.
OPERATION PANEL OF THE AIR CONDITIONER
6 6
2 2
3 3
4 4 5 5
7 7
8 8
1 1
Selects the appropriate operating mode.
Each time you press the button, a mode
is selected in a sequence that goes from
AUTO, COOL, DRY, FAN and
The mode indicator light
illuminates under the different mode settings
Fig.4.
MODE select button
1 1
Used to adjust (increasing/decreasing)
temperature settings(1 C/2 F increments)
in a range of 17 C(62 F) to 30 C(88 F) or
the TIMER setting in a range of 0~24hrs..
6 6 UP( ) and DOWN( ) button
NOTE: The control is capable of displaying
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press
and hold the Up and Down buttons at the same
time, for 3 seconds.
3 3
Used to initiate the AUTO ON start time and
with the & buttons.
TIMER button
4 4
Used to initiate the SLEEP operation.
SLEEP button
6 6
2 2
Power switch on/off.
POWER button
AUTO AUTO
HEAT HEAT
COOL COOL
DRY DRY
FAN FAN
MODE MODE
ION ION
SLEEP SLEEP FAN FAN
HI HI
MED MED
LOW LOW
TIMER ON TIMER ON
TIMER OFF TIMER OFF
F
C
5 5 FAN button
7 7
O
Shows the set temperature in C or
O
F and the Auto-timer settings.
While on DRY and FAN modes, it shows
the room temperature.
LED Display
SWING SWING
Remote signal receptor
(Some models have the
signal receptor on the
front panel , Fig.2)
9 9
Control the fan speed. Press to select the fan
speed in four steps-LOW, MED, HI and AUTO.
The fan speed indicator light illuminates under
different fan settings except AUTO speed.
Error codes:
E1-
Room temperature sensor error-
Unplug the unit and plug it back in.
If error repeats, call for service.
E2- Evaporator temperature sensor error-
Unplug the unit and plug it back in.
If error repeats, call for service.
E4- Display panel communication error-
Unplug the unit and plug it back in.
If error repeats, call for service.
P1- Bottom tray is full - Connect the
drain hose and drain the collected
water away. If error repeats, call
for service.
AUTO OFF stop time program, in conjunction
(The models that do
not have this feature
do not have this button)
HEAT(Not available
in cooling-only models).
When
AUTO fan speed is selected, all the fan indicator
lights turn dark.