Sylvania SY20C6144-A, Руководство пользователя

Страница: 8 / 27

PRODUCT
INFORMATION
7 6
15 REC CHECK button
During recording, is used to confirm the
record checking operation.
16 DISPLAY button
displays some or all data on or off
(date/time, tape counter, etc...) (or in
playback mode, current mode playback
speed of VCR) with each press of this
button.
17 REC/PLAY SPEED
…
/
†
buttons
used to select the recording speed during
stop or recording mode of VCR. Also it is
to select the playback speed during
playback mode.
18 ALARM button
When you press it for 2 seconds or
more, it turns the alarm mode ON or
OFF.
* In alarm off mode, alarm recording
can’t be performed even if there is
alarm signal.
19 AUDIO SEL button
selects talk input channel camera.
20 ALARM -/+ buttons
21 INDEX -/+ buttons
22 COUNTER GO TO 0 button
23 CLEAR button
used to delete the information stored on
screen display as Alarm time, Tape
counter and timer program setting.
1) All of the Alarm time which is
previously set can be deleted by
pressing CLEAR button in ALARM
INPUT TIME menu.
2) Timer Program setting can be deleted
by pressing CLEAR button in the line
that the hand mark ( ) is located
in TIMER PROGRAM REC SET menu.
3) Tape counter can be reset to “0H
00M 00S” in playback mode when the
cassette is loaded.
24 TIMER button
used to select timer recording stand-by
mode.
25 FF
√√
button
begins high-speed fast-forward of tape or
high-speed playback during playback.
26 SET- / TRACKING - button
27 AUDIO button
turns the audio ON or OFF.
28 SET+ / TR button
29 TALK button
used to talk to the person at the camera
location when using a 6 pin Din camera.
Press and hold to talk to the person.
Release to listen.
30 SHIFT / Volume Down button
Volume button is available only in AUDIO
ON mode.
31 PIP button
Pressing this button consecutively will
switch the screen from PIP (single
channel) to PIP (Twin Picture).
32 SHIFT / Volume Up button
Volume button is available only in AUDIO
ON mode.
33 MENU button
This button allows the user to enter/exit
the Menu screen.
* MENU button is unavailable in
playback, FF or REW mode. Available
only in Stop mode.
34 POWER button
turns the monitor ON or OFF.
* Only “AUDIO” button is available in
Power Off mode.
Video Cassette Tapes
Handling Cassette Tapes
• Cassette tapes should always be stored vertically in their
cases, away from high temperatures, magnetic fields,
direct sunlight, dirt, dust and locations subject to mold
formation.
• Do not tamper with the cassette mechanism.
• Never touch the tape with your fingers.
• Protect cassette tapes from shocks or strong vibrations.
To Protect your recordings
• After having recorded a tape, if you wish to keep the
recording, use a flathead screwdriver to break off the
erasure-prevention tab on the cassette.
• To record again on a tape without erasure-prevention
tab, cover the hole with an adhesive tape.
Erasure-prevention tab
To prevent accidental erasure, remove the
tab after recording.
To record again, cover the hole with vinyl
tape.
Loading
Place the cassette, label
side up, in the loading
slot. Gently push the
center of the cassette until
it is loaded automatically.
Unloading
In STOP mode, press the EJECT button. The cassette is
automatically ejected.
✔
• If you try to record on a
cassette without the erasure-
prevention tab, the set will
eject the cassette.
• If the TIMER button is
pressed when a cassette
without the erasure-
prevention tab is loaded,
the set will eject the
cassette, the timer recording
LED will be lit on and a
buzzer will sound if “YES”
is set in the menu for
buzzer.
1280 HOUR TIME LAPSE RECORDER - 40 HOUR REAL TIME
✔
• When the cassette is
loaded,
(
Tape In ) LED
will be lit on.
• The counter display will
switch to the reset counter
“0H 00M 00S” display on
the monitor screen.
✔
• Do not insert any object in
the cassette loading slot, as
that may cause injury and
damage to the set.
• If your hand gets stuck in
the cassette loading slot,
unplug the power cord and
consult the dealer where
the unit was bought. Do not
forcibly pull the hand out as
that may cause severe
injuries.
Locations of controls and indicators
Use only video cassette tapes bearing the logo.
This set was primarily designed for use with T-120
cassette tapes. It is recommended to use T-120 VHS
video cassette tapes for optimal performance.