Sylvania STT104BT-BLACK, Инструкция по эксплуатации, Страница: 3 / 18

Turntable Operation
1. Plug the small end of the power plug into your turntable.
2. Connect the big end of the power plug to the wall outlet.
3. Place the vinyl record on your turntable.
4. Set the correct speed (rpm) of your vinyl record (33/45/RPM).
For 45 RPM vinyl record, using the RPM adaptor.
5. Turn on the power of the turntable.
6. Move the tonearm to the desired starting point on the record. Then turntable is playing
now.
7. Adjust speaker volume to the preferred level.
8. Slide the Auto Stop Control switch to choose the out stop.
9. At the end of the record, the TONEARM will stop automatically. You must return the
TONEARM to the Tonearm Rest manually.
Headphone Jack
Plug headphone into the headphone jack to listen to the music. Headphone is not included with
the unit.
Note: When using headphone, the sound from the speaker will be cut off
RCA Audio Out
Enables you to play back your turntable music through the external speakers. To make this
connection, you need a RCA cable.
Play 45rpm Vinyl
Place the 45 rpm ADAPTOER over the spindle. Gently place your 45rpm record onto the
turntable. Follow the steps under Turntable operation to play your record.
Replace Cartridge
The turntable’s cartridge needs to be replace every 3~4 months after continuous playing.
Rechargeable battery inside:
The total capacity is 1200mAh, which allows you to enjoy this platinum
At home using the power of the battery.
The charge instruction light stays red until it is fully charged. (The red light will extinguish when
fully charged.