15
STORING PHONE NUMBERS AND NAMES
Memory Dialing allows you to dial a number using just a few key strokes.
Your ST88245 stores up to 10 names/numbers in the handset.
1) Press
MEM
then “
Select Memory
”
is displayed.
2) Press
/VOL
and
/VOL
, or enter a
number (0 - 9) to select the memory
location where you would like to store
the number.
3) Press
SELECT
twice. The following screen
appears and a cursor flashes indicating
that the display is ready for the name to
be entered.
If this screen appears, the selected
memory location is already stored. Then
you must either change the entry in this
location, clear the entry in this location,
or select “
Go Back
” to choose
another location.
4) To enter a name (up to 13 characters), use the number keys.
• See the “Steps for entering names and special characters” (See page 16).
• Use
#/
and
/TONE/
to move the cursor to the desired location.
• Use
CH/DELETE
to delete characters as needed.
• Press and hold
CH/DELETE
to delete all the characters.
• If a name is not required, go to step 5.
5) Press
SELECT
. “
Store Number
” is
displayed. The cursor flashes indicating
that the display is ready for the number to
be entered.
6) Use the number keys,
#/
or
/TONE/
,
to enter the phone number. The phone
number cannot exceed 20 digits.
Use
PAUSE/REDIAL
to enter a pause in
the dialing sequence.
The display shows a “
P
”. Each pause counts as one digit and represents a
two second delay of time between the digits as they are sent.
Use
CH/DELETE
to delete digits as needed.
NOTE:
The pause feature is useful for long distance calling, credit card dialing, or
sequences that require a pause between digits.
S e l e c t M e m o r y
0 1
0 2
E d i t M e m o r y 0 2
D e l e t e M e m o r y 0 2
G o B a c k
S t o r e N a m e
MEMORY DIALING
UP044DH (ST88245) OM resize 3/4/04 6:13 PM Page 15