4
PREPARATION FOR USE
Unpacking and Setup
•
•
•
Carefully remove the unit from the display carton and remove all packing material from the unit itself.
The detachable AC power cord is packed in the carton separately from the unit. Make sure that the AC
power cord is not accidentally discarded with the carton or packing material.
Press the OPEN/CLOSE area to open the CD compartment door. There is a white card in the CD
compartment which is intended to prevent the CD pickup from moving during shipment of the product.
Remove this card from the CD compartment before use.
Power Sources
This portable audio system is designed to operate on either 110-120V AC 60Hz house current DC or by
using eight (8) 'C' batteries (batteries not included). Attempting to operate this unit from any other power
source may cause damage to the unit.
AC Operation
Unwind the AC cord and extend it to its full length. Insert the small end of
the AC cord into the AC socket on the rear of the unit. Insert the other
end of the AC cord into any convenient 110-120V 60Hz household outlet.
Please note that this unit is equipped with a polarized AC plug which has
one blade wider than the other. This is a safety feature to reduce the
likelihood of electric shock. This polarized AC plug will only fit in a
polarized AC outlet. If you find that you cannot insert this plug into your oulet, you may have an obsolete
non-polarized outlet. Please do not try to defeat this safety feature by using a non-polarized adapter or by
filling the wider blade to make it fit into your outlet. If this plug does not fit into your outlet, you should
contact a qualified licensed electrician to replace your obsolete oulet.
Battery Installation
To use this unit with battery power, remove the battery compartment on the bottom of the unit by sliding it
towards the rear of the unit and lifting the battery door off. Insert eight (8) 'C' size batteries (not included)
following the diagram in the compartment.
NOTE: The AC power cord must be disconnected from the AC socket on the rear of the unit in order for
the unit to operate on battery power.