background image

- 8 -

Care & maintenance

Cleaning tape heads

The tape heads, roller and capstan require
occasional cleaning to remove particles of
metal oxide coating that wear off the tape.

• Press the

 Power

 button to switch the

power off.

• Press the 

Stop/Eject

 button to open the

cassette door.

• Press 

Play

.

• Clean the tape head, pinch roller and

capstan with a soft cloth or cotton bud
dampened in iso-propylacohol or a special
tape head cleaner.

Cleaning CDs

Use a soft cloth to wipe off any fingerprints
and dust from the disc surface.  Wipe in a
straight line from the centre to the outside of
the disc.  Small dust particles and light stains
will not affect reproduction quality.

• Never use chemicals such as record sprays,

anti-static sprays, benzine or thinners to
clean your CDs.

• To reduce the risk of scratches, always put

CDs back in their case after use.

• Do not expose CDs to direct sunlight, high

humidity or high temperatures for long
periods.

• Do not stick paper or write anything on

either side of the CD.

Only discs displaying this
symbol can be played on
this unit.

Cassette care

You can help avoid two of the most common
problems of cassette usage.

These are:
• jamming - which causes uneven playback

speed.

• tangling - where the tape wraps itself

around the playing mechanism.

To reduce the likelihood of these problems
occurring, the following precautions should be
observed.

Check that there are no loose layers of tape
visible through the window in the cassette.

Use a pencil or hexagonal shaped ballpoint
pen to wind along any loose lauers before
inserting the cassette into your machine.

If the cassette feels 

tight

 when winding the

tape with a pencil or pen, the tape may be
jamming due to ridges formed in the winding
of the tape.  You can see these through the
cassette eindow.  In most cases, you can
remove these ridges by fast forwarding the
tape from one end to the other in your
cassette player.

• Use only well known brands of tape.
• Avoid C-120 cassettes, as the tape material

deteriorates much quicker.

• Always avoid exposing cassettes to direct

sunlight, dust or oil.  Do not touch the
surface of the tape.

Содержание SRCD348











Отзывы: