CD
3.5 MM AUDIO INPUT
RADIO
Playing the Radio
1. Slide the
Source Switch
switch to AM or FM
radio mode.
2. Adjust the
Tuning
dial to tune the radio.
Radio Reception
An AM and FM antenna is built into the radio.
To improve radio reception, adjust the position
of the boombox.
POWER & BATTERY
Loading and Playing a CD
Note: This unit is not compatible with MP3 CDs.
1. Open the CD door and place a CD in the
boombox, label side facing up.
2. Close the CD door.
3. Adjust the
Source
Switch
to CD mode.
4. Press the
Play/Pause
button to begin playing
the loaded disc.
Programming a CD
1. Press the
Stop
button to stop a loaded CD.
2. Press the
Program
button.
“01” will blink on the display.
3. Press the
Skip/Search
buttons to select a track.
4. Press the
Program
button to add the selected
track to the program.
5. Repeat steps 4 and 5 to program up to 20 tracks
to play in a
order.
6. Press the
Stop
button to cancel a program.
Using the Line In
3.5 mm audio input cable not included.
1. Plug one end of a 3.5 mm audio input
cable into
the
Line In
input on the back of the unit, and
plug the other end of the cable into the audio
output on an MP3 Player or other audio source.
2. Press the
Power
button to power the unit on.
3. Slide the
Source Switch
on the front of the unit
to
Line In.
4. Audio played through the connected device will
now be heard through the speakers.
To power the unit, plug the power cord (included) into the AC Power Input on the back of the unit and a standard AC power outlet.
For battery power, this unit requires 6 C-size, batteries (not included).