•
Press the POWER button to turn on the unit.
•
Press and toggle
the
MODE
button
to select
Bluetooth mode. The unit will
search the paired device with the “BLUETOOTH” Indicator lit.
•
Press and hold the
PRESET/
PAIR
Button
for 4~5 seconds. Then the “BLUETOOTH”
Indicator is flashing, the unit will goes into Pairing/Discoverable mode.
•
Turn on the Bluetooth function of your Bluetooth device and enable the search or
scan function to find the unit.
•
Select "
SRC
1227
BT
"
fro m
th e
devic e
li st
whe n
it appea rs
on yo ur
devic e
screen. If
required, enter the pass code “0000” to pair (link) the unit with your device.
•
After successfully pairing (linking) the Bluetooth enabled device the “BLUETOOTH”
Indicator steadily and a short beep will heard.
Note: If you can’t pair the unit with your Bluetooth enabled device, you can try to turn Off &
On the power of your unit to solve the problem.
Radio Operation
The unit is designed to receive FM Stereo radio bands.
1. Switch and toggle
the
MODE
button
on the top
of the unit to switch to
FM mode.
2. Adjust the
TUNING
knob on the top of unit to tune the frequency of desired radio
station.
3. To turn off the unit power, press the
POWER
button to switch off the unit.
Remark:
If the FM reception is weak, try to adjust the length and the angle of the FM antenna
to improve the signal reception.
1. If the unit has never been paired with a Bluetooth device before, you
need to follow the
pairing instructions below to link the
SRC
1227
BT
with your Bluetooth device.
Bluetooth Operation
7
