Sylvania SP244, Руководство пользователя

Страница: 10 / 23

10
EN
Using as a wired Speaker
The SP244 can be used as a wired speaker by using the included 3.5mm
Auxiliary Cord.
1. Plug one end of the Aux cord into the AUX jack on the side of the speaker.
2. Plug the other end of the Aux Cord into the headphone jack of any media device
that has a 3.5mm headphone jack (this is a standard headphone-out jack).
3. Use your media device’s music controls to control the music.
Only volume can be controlled when connected to a device using the Aux Cord.
Certain Bluetooth features including those listed may not be supported by
all compatible Bluetooth enabled devices, and/or the functionality of such features
may be limited in certain devices.
Playing Music
To enjoy wireless music on your Bluetooth speaker, make sure you are connected to
a Bluetooth enabled device. Once connected you can press PLAY on your Bluetooth
device or you can press the button on the SP244 Bluetooth Speaker.
Once playback has begun, you can control the music or answer phone calls from the
control buttons of the Bluetooth speaker (with devices that have the AVRCP Bluetooth profile).
Play/Pause
Press the button to pause the music. To resume music playback, press
the button again.
Adjusting the volume
Way 1: Rotate the Volume Knob to adjust the volume to the desired level.
Way 2: Press and hold the button to increase the volume and the button
to decrease it to your desired level.
Note: You may also adjust the volume from your mobile phone’s volume control.
Skipping or searching songs
(With devices that have AVRCP Bluetooth profile)
Press the button to go the next song
Press the button to go the previous song