4
Step 5: Attach panel D to panel I and J with 2 KD screws. See Fig. E.
Fig. E
BACK
Step 6: Attach panel C to panel E and F with 4 KD screws. See Fig. F.
Fig. F
BACK
Step 7: Attach panel A to the unit as shown in Fig. G with 5 KD screws.
Fig. G
BACK
FIREPLACE INSERT INSTALLATION:
The fireplace insert can be installed after the mantel has been fully assembled.
WARNING:
Make sure the fireplace insert controls are in the OFF position and the
unit is NOT plugged in.
Step 1: Attach 2 large L brackets to each sides of the fireplace insert with small screws
[T], washers [P] and nuts [R]. See Fig. H.
Fig. H
BACK
Step 2: Attach fireplace insert into the unit as shown in Fig. J. Attach 3 Small bracket
[S] and 3 medium KD screws to the top of insert. Attach 2 short KD screws to
the Large “L” brackets.