6
OPERATING INSTRUCTIONS
POWER CONNECTION
This product operates on 120V~ 60Hz power supply. Plug the AC Adaptor into a
household outlet AC source.
CONNECTING THE AC ADAPTER
1. Insert the DC plug of the AC adapter (included) into the DC Jack of the unit.
2. Fully insert the blades of the AC adapter (included) into the slots of a working
wall socket as shown.
3. The
LCD DISPLAY
of the unit will show a flashing time of “12:00” prompting you
that the time is not valid and needs to be adjusted to the right time as soon as
possible.
4. After correctly setting up the time (as described in the next section), your unit is
now in standby mode.
BATTERY BACKUP
This unit is equipped with a battery back-up system, requiring two DC 1.5V UM-4
type batteries (not included). Insert the battery in the
BATTERY COMPARTMENT
,
making certain that the positive and negative (+ and -) sides are properly aligned. If
power failure occurs, the clock automatically switches to the battery power supply,
the clock continue running internally and the radio presets are preserved. When
power returns, the unit switches back to AC adaptor again.
NOTE:
The display will not exhibit time during power failure but the clock will keep
correct time internally.
BATTERY CARE
Use only the size and type of batteries specified.
If the unit is not to be used for an extended period of time, remove the battery.
Old or leaking batteries can cause damage to the unit and may void the warranty.
Do not try to recharge batteries not intended to be recharged; they can overheat
and rupture (Follow battery manufacturer’s directions).
Do not dispose of batteries in fire, batteries may leak or explode.
