18
- - General Setup Page - -
Go To General Setup Page
TV Shape Wide
Angle Mark On
OSD Lang
Eng
Screen Saver On
In General Setup Page:
the multi-angle logo will appear on the screen.
or the image is paused for approximately five minutes.
On or Off. If set to On, when
multi-angles are available in the playing DVD,
Direction and
Buttons to set the
OSD language as desired.
Off. If set to On, the
screen saver will come on when the unit stops
it On or
6. If Last Memory is selected, using the Direction and OK Buttons to set it On or Off. If set to On, the unit
will start playback from the position where the disc was stopped last time.
1. If TV Shape is selected, using the Direction and OK Button to set the aspect ratio to match the
connected TV.
2.
If Angle Mark is selected, using the Direction and OK buttons to set it
OSD Lang (On Screen Display Language) is selected, using the
3.
If
5.
If Screen Saver is selected, using the Direction and
Buttons to set
menu will appear.
to Lt/Rt; Stereo.
If Speaker Setup is selected, press the
Button, the sub-setting
1.
If Downmix is selected, using the Direction and OK Buttons set it
~ If set to Lt/Rt, the rear left or rear right channels will play on both Left and Right Speakers.
~ If set to Stereo, the rear left channel will play on Left Speaker; the rear right channel will play on Right
Speaker.
Last Memory Off
OK
OK
OK
In Speak er Setup Page:
SYSTEM SETUP
◄
,
►
,
▲
,
▼
to enter or confirm the selection. After setting, press the SETUP Button to save and exit.
In completely stop mode, press the SETUP Button on remote control, the setting menu will appear on the screen
as below. Using the Direction Buttons to select and highlight the function you need to set or reset.
Press the OK Button
Captions
Off
4. If Captions is selected, using the Direction and OK Buttons to set it On or Off. If set to On, when the
captions available on the playing disc, it will appear on screen.
