5
Step 7: Attach LEFT TRIANGLE SUPPORT [L] and RIGHT TRIANGLE
SUPPORT [M] on LEFT and RIGHT SIDE PANEL [G and H]. See
Fig. G.
Do not attach TRIANGLE SUPPORTS [L and M] and CORNER TOP
PANEL [N] unless the fireplace is to be installed in the corner.
Step 8: Connect CORNER TOP PANEL [N] to TOP PANEL [A] with 6
MOUNTING SCREWS [T]. See Fig. H.
Step 9: Install TOP PANEL [A] to the unit with 4 KD SCREWS as
shown in Fig. J.
Corner panel shall be fully opened if attached and fireplace shall
be installed at corner only.
Step 10: Place the insert in the back of mantel on floor. Carefully
lift the INSERT into the mantel until the trim is against to mantel.
See Fig K.
Step 11: Attach 4 MOUNTING BRACKETS with 4 MEDIUM KD
SCREWS at the bottom of insert. (2 MOUNTING BRACKETS at
each side). See Fig L.
