DVD Functions
EN
– 21 –
DISPLAY Setting
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
B
AUDIO Setting
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 3
in the “CUSTOM Menu” section on page 20.
C
4
Select the desired item
.
SETUP
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
5
Hint
TV ASPECT:
• Select “4:3 LETTER BOX”, so that
black bars may appear on the top
and bottom of the screen.
• Select “4:3 PAN & SCAN” for a
full height picture with both sides
adjusted.
• Select “16:9 WIDE” if a wide-screen
TV is connected to this unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”, automatically
select the best resolution setting
(FRAME or FIELD) based on the
data characteristics of the pictures.
(default)
• If you select “FIELD”, the picture in
the still mode will be stabilized.
• If you select “FRAME”, the picture in
the still mode will be highly defined.
• An individual picture on TV screen
is called a “frame”, which consists of
two separate images called as “field”.
• Some pictures may be blurred if you
select “AUTO” in the still mode due
to their date characteristics.
4
Select the desired item.
DISPLAY menu
AUDIO menu
TV ASPECT:
QUICK
(Default: 4:3 LETTER BOX)
See Hint on the left.
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
Select the
desired
setting.
or
STILL MODE:
(Default: AUTO)
See Hint on the left.
TV ASPECT
4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
STILL MODE
AUTO
FIELD
FRAME
Select the
desired
setting.
or
5
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DOLBY DIGITAL:
QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs a Dolby Digital Signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
OFF
ON
BITSTREAM
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ON
ON
PCM
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ON
OFF
BITSTREAM
Hint
DRC:
• This function is available only on
the discs which are recorded in
the Dolby Digital format.
DOWN SAMPLING:
• When playing back a 96kHz disc
with the copyright protection,
or when Virtual Surround is set
to “1” or “2”, the sound will be
down sampled at 48kHz and
output as digital audio even if
the “DOWN SAMPLING” is set
to “OFF”.
•
This function is available only
on digital outputting of a disc
recorded in 96kHz.
SETUP
DISPLAY
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
OFF
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
or
or
6
To exit the menu
SETUP
PROGRESSIVE:
QUICK
(Default: OFF)
See Hint on the right.
6
To exit
the TV ASPECT or
STILL MODE screen
To complete the
PROGRESSIVE setting
ENTER
ENTER
ENTER
SETUP
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
4:3 LETTER BOX
AUTO
ON
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
A c t i va t e P r o gr e s s i ve ?
SELECT:
K
/
L
SET:ENTER
NO
YES
NO
YES
NO
YES
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
SELECT:
K
/
L
SET:ENTER
If there is no picture
or you do not press
any buttons for 15
seconds, Progressive
scan will switch to
“OFF” and it will exit
the setup menu.
SETUP
ENTER
ENTER
ENTER
Hint
PROGRESSIVE
:
• You can set “PROGRESSIVE” to
“OFF” in the DISPLAY menu or
press and hold
[PLAY
B
]
on the
front of the unit for more than 5
seconds during playback, so that
the PROGRESSIVE SCAN
indicator on the front panel
lights off.
• When “PROGRESSIVE” is “ON”,
video signals from the unit’s
VIDEO OUT and S-VIDEO OUT
jacks will be distorted or not be
output at all.
Select “Yes”.
or
Select “Yes”.
or
E8A00UD_E8C00UD.indd 21
E8A00UD_E8C00UD.indd 21
2006/08/18 13:11:32
2006/08/18 13:11:32
