E-6
Insert the microphone plug into the MIC JACK (#6). If you use a microphone
other than the one that is included, and it has a remote control plug, plug that
into the REM JACK (#6).
Audio Source –
Connect the audio source to the AUX JACK (#4) using a mono patch cord
(not included) and set the audio source’s volume to the desired level.
2. Press the STOP/EJECT
to load a blank cassette tape.
3. Record: Both PLAY and RECORD buttons should be pressed
simultaneously and recording starts.
Notes: a. Do not force down the RECORD button if the tape’s erase-
protection tabs have been removed, or you will damage the recorder.
b. The recorder automatically sets the recording level. The VOLUME (#8)
does not control the recording volume.
4. Press the STOP/EJECT
to stop recording. Recording stops automatically
when the tape ends.
CARRYING HANDLE
Slide out the handle out to carry the recorder.
CARE AND MAINTENANCE
1. Do not subject the unit to excessive force, shock, dust or extreme temperature.
2. Do not tamper the internal components of the unit.
3. Clean your unit with a dry cloth. Solvent or detergent should never be used.
4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
5. Keep your unit away from heating appliances and sources of electrical noise
such as fluorescent lamps or motors.
ABOUT CASSETTE TAPES
Whenever you record on a cassette any previously recorded material is erased as
the new material is recorded. To prevent you from accidentally erasing material
which you wish to save, blank cassettes are equipped with erase prevention tabs
for each side of the tape. If the erase prevention tab for side A is removed, you
cannot accidentally record on side A. The Record key cannot be depressed if the
erase prevention tab on the cassette has been removed.
To prevent accidental erasing on side A of a cassette use a small screw driver or
similar tool to break off the erase prevention tab for side A. This prevents the
record key form locking.
Содержание 058465807436
Страница 3: ......
