Sylvac 54-618-300, Быстрое руководство по установке

Страница: 6 / 12

E
2. Start-up
When you first switch on your D300S unit, the default interface will be active
as shown below.
When the unit is switched off, your last defined parameters will be retained
when the unit is next used.
It is possible to save your configurations in order to use your D300S for sev-
eral different workstations (see chapter 3.2).
When an instrument is connected, it is automatically assigned a channel.
The cable’s identification address is registered by the unit .
It is therefore vital not to switch it with other instruments. If you disconnect
the cable from the unit and use a different USB port when you next connect
it, the same channel will be reassigned to it.
3. User interface
Window showing details of channel X
Active page indicator
Select page X/X
Configure number of screens (max. 8/page)
General configuration
Display type (measurement or statistics)
Individual preset for channel
Reset channel
Configure channel
Record measurements
Clear all displayed channels
Preset all displayed channels
1
2
3
4
5
6
7
8
9
10
11
12
6
1
3 4 5 6
10
11
12
8
2
7 9