3
Operating Instructions
Micro LED light chain, 50 LEDs
Item no: 2361866
1 Intended use
Use the product to decorate interior and exterior spaces. Do not use the product for lighting
purposes; the product is not suitable for illuminating working and living areas in your home.
The product is designed for private use only.
The product has an IP44 ingress protection rating. It is splash proof and suitable for outdoor
use. Do not submerge in water.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Product
■
Power adapter
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR
code shown. Follow the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in this document. Always read this information carefully.
Read the operating instructions carefully.
This product is constructed according to protection class III.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
5.2 Handling
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. Safe operation can no longer be guaranteed if the
product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
■
Consult an expert when in doubt about the operation, safety or connection of the appli-
ance.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
5.4 Power adapter
WARNING
Do not tamper with power supply components. Risk of death by elec-
tric shock!
● Always ensure proper connection.
● Never use damaged power supply components.
● Do not modify power supply components.
■
Connect the appliance to a wall socket that can be accessed easily.
■
As power supply, only use the supplied mains adaptor.
■
Only connect the power adaptor to a normal mains socket connected to the public sup-
ply. Before plugging in the power adaptor, check whether the voltage stated on the
power adaptor complies with the voltage of your electricity supplier.
■
Never connect or disconnect power adaptors if your hands are wet.
■
Never unplug the power adaptor from the mains socket by pulling on the cable; always
use the grips on the plug.
■
For safety reasons, disconnect the power adaptor from the mains socket during storms.
■
Do not touch the power adapter if there are any signs of damage, as this may cause a
fatal electric shock! Take the following steps:
– Switch off the mains voltage to the socket containing the power adapter (switch off the
corresponding circuit breaker or remove the safety fuse, and then switch off the cor-
responding RCD protective switch).
– Unplug the power adapter from the mains socket.
– Use a new power adapter of the same design. Do not use the damaged adapter
again.
5.5 LED light
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
5.6 Light chain operation
■
Do not electrically attach this light chain to another light chain. Chaining light chains can
lead to fire.
■
The lights become hot during operation and can start a fire. To prevent fire, observe this:
– do not cover the product
– keep the product away from highly combustible materials
■
Always check the light chain for damage before use. For your own safety, do not use a
damaged light chain.
6 Product overview
5 m
9.9 m
7 Setting up
7.1 Placing/installing the product
Before you use the product, place or install it in a suitable location.
Important:
– Do not set up the product under water.
– Do not hang any objects from the product.
– Make sure that the cables hang loosely to avoid tearing.
– Do not fasten the product directly to the installation surface (for example with push-
pins).
1. Lay the product out entirely and arrange the cables so that they are not tangled.
2. Select a suitable location. If necessary, install suitable holders for the product (i.e. screw
hooks, nails, etc.).
CAUTION! Do not place the product on easily flammable/com-
bustible materials or products.
3. Lay the product on the holders or on the branches of a tree or bush. Use plastic cable
ties to fasten the product if necessary.
7.2 Connecting to the power adapter
To power the product, connect it to the power adapter.
1. Connect the plug to the connector on the power adaptor. If there is a seal, be careful not
to damage it.
2. Secure the connection by tightening the plug‘s screw cap.
