33
l) Setting function “NR”
Here the noise reduction can be switched on/off or regulated separately for the brightness and
colour signal.
“NR MODE”
“Y/C”: Noise reduction for brightness and colour signal
“Y”: Noise reduction for the brightness signal
“C”: Noise reduction for the colour signal
“OFF” Noise reduction switched off
“Y LEVEL”
Noise reduction level for brightness signal (0....15)
“C LEVEL”
Noise reduction level for colour signal (0....15)
m) Setting function “CAMERA ID”
If desired, the name of the camera can be embedded in the image. Such an identifying assign-
ment can be carried out especially with the use of numerous cameras, e.g. if you enter the instal-
lation location. A simple identi
fi
cation is also possible with the recording and later playback of the
camera image.
“OFF”
The display of the camera name is switched off.
“ON”
The display of the camera name is switched on.
If you press the button, the name of the camera can be changed. You can
enter a total of two lines with 26 characters each.
Make sure that the typeset “CHR1” is always selected! With “CHR2”, no
characters are stored and no letters appear for selection.
“CLR”: The character just selected is deleted.
Arrow buttons: Use these to select the input point of the camera name that
you wish to change.
“POS”: If you con
fi
rm this function with the button, you can then freely select
the position of the camera name in the image (move the button up/down/
left/right). Con
fi
rm the position by brie
fl
y pressing the button.
n) Setting function “LANGUAGE”
The setup menu of the camera can be displayed in various languages. Choose among German,
English, Spanish, Portuguese, Russian, French and Chinese.
o) Function “CAMERA RESET”
To reset the camera to factory settings, select this menu point and brie
fl
y press the button.
