SYCLOPE TRACE'O, Руководство пользователя

Страница: 46 / 60

Specialist Menu Page 46/60
Programming manual of SYCLOPE TRACE’O ®
7) Hold function
This function allows to keep all the algorithms of calculation when the SYCLOPE TRACE’O ®
controller is stopped. (Green LED off).
When the controller stopped for a short time, the controller keeps his accuracy and restarts
immediately with the previous calculations.
Use the +/- keys for disabling or
activating the function …
Use the “OK” key to validate.
8) Maintenance function
Allows to activate the maintenance function of the SYCLOPE TRACE’O ® controller.
The activation of the maintenance allows to display more informations onto the different screens and
accessing to the manual actions on relays and communication controls.
This option extends the possibilities of the controller by giving the following functions:

Displaying the gross current of the sensor in “Stop” mode.

Activating/Disabling manually all the relays

Simulating the output currents onto Ia and Ib analogical outputs

Controlling the good working of the Modem (If activated)

Sending data information onto the RS232C printer port.
Use the +/- keys for disabling or
activating the function …
Use the “OK” key to validate.
>> SPECIALIST MENU << _
Specialist code
Select. Parameters
Type of controls
Relay functions
Analog. Functions
Polarization cycles
Hold function
>> SPECIALIST MENU << _
Specialist code
Select. Parameters
Type of controls
Relay functions
Analog. Functions
Polarization cycles
Hold function
>> SPECIALIST MENU << _
Hold Function
Disabled ...
Activated ...
>> SPECIALIST MENU << _
Specialist code
Select. Parameters
Type of controls
Relay functions
Analog. Functions
Polarization cycles
Hold function
>> SPECIALIST MENU << _
Select. Parameters
Type of controls
Relay functions
Analog. Functions
Polarization cycles
Hold function
Maintenance state
>> SPECIALIST MENU << _
Maintenance state
Disabled ...
Activated ...