User Manual PILOT
touch
May 2016
Page 6 of 20
4
Programming
All settings can be done in the programming mode. To enter programming mode please touch Key 7
and 14 simultaneously. You will see both LEDs lighting up green and after about 1 sec. you can see
the main programming menu.
To navigate in programming menu please use the “upwards”, “downwards”, “OK” and “Exit” button.
In some situations you will find soft keys shown at the bottom of the display, please use Key 1 and 8
to select them.
The “return” button also leaves the programming mode and changes back to normal use mode.
Depending on the changes you’ll see a message that asks you to wait until changes have been saved.
The following main options are available:
Languages
Change Language
Scanmode
Scanmode settings
Illumination
Change brightness of display and key backlight
Key macros
All settings for the keys, like icon, IR, voice recording
Levels
Voice recording for level announcment
Special modes
Activate special functions
Sysinfo
Device information
