Sybase Adaptive Server 15.0.2, Руководство по установке

Страница: 53 / 160

Installation Guide
39
C H A P T E R 3
Post-Installation Tasks
After the installation process, you have a minimally configured Adaptive
Server. This chapter describes post-installation tasks to administer
Adaptive Server and install stored procedures and sample databases. For
more information, see the configuration guide for your platform.
Post installation instructions
Sybase recommends that you perform all of the steps below after
installing Adaptive Server on Windows platforms. These steps should be
performed as the “sybase” user that installed the Adaptive Server product.
Verify that the “sybase” user is a member of the Windows system-defined
group “Administrators” so the user has the access privileges that allow
them to complete the steps described below.
1 Stop all Adaptive Server services.
Using the Administrative Tools, open Services, select each of the
Sybase Adaptive Server entries and stop them. There are separate
entries in Services for Sybase Adaptive Server SQLServer, XPServer,
BCKServer, MONServer, and SYSAM.
Topic Page
Post installation instructions 39
Verifying that servers are running 40
Verifying that you can connect to servers 41
Connecting to Adaptive Server via Sybase Central 42
Setting the System Administrator password 42
The SAMreport 43
Installing sample databases 44