2 0 6 3 6 5 R e v. 8 0 9 U F S . 1 0 . 8 0 9 . 7. U
1 2 . 2
|
C L E A N I N G T H E S H E L L
Your Spa Feng Shui 2G System is shipped to you wrapped carefully
in clear plastic wrap. The plastic wrap will keep your Spa Feng
Shui 2G System clean and safe during its journey, but the plastic
causes one minor side effect—it leaves a slight film on the shell.
We recommend that you wipe down your machine as soon as you
uncrate it.
To clean the inside and outside of the shell:
1.
Spray on Accel TB .05% disinfecting solution.
2.
Let solution sit for 30 seconds.
3.
Wipe surface dry and clean with a soft cloth or paper towel.
Note:
Do not use any type of abrasive pad or scouring
powder as they may scratch the surface finish.
1 2 . 3
|
C L E A N I N G T H E
U N D E R B E D A R E A
The following should be
done after every Spa Feng Shui 2G
session:
A.
Carefully remove bed sections from unit, unplug vibratory bed
motor chords from the unit if necessary.
B.
Clean dirt, dust and perspiration from underbed surfaces
following directions below.
C.
Spray desired surface/area with Accel .05% TB Disinfectant.
D.
Let solution sit for 30 seconds.
E.
Wipe surface dry and clean with a soft cloth or paper towel.
1 2 . 4
|
C L E A N I N G C O N T A C T
S U R F A C E S ( B E D , H E A D
P I L L O W , I N T E R I O R
O F S H E L L )
1.
Use Accel TB .05% Disinfectant on all contact surfaces
AFTER
EACH USE
to present a clean, sanitary appearance and feel for
each new client.
2.
Let solution sit for 30 seconds.
3.
Wipe dry and clean with paper or soft cloth towel.
4.
Bed and head pillow could stain over time. For light staining,
we recommend using “Soft Scrub” cleaner and isopropyl alcohol.
5.
Spread “Soft Scrub” and alcohol on the bed surface, let it sit
for 5 minutes, then dampen a soft cloth with water and gently
rub the area in circles.
NOTE:
Cleaning after each use removes oils, perspiration and
cosmetics. It will also prolong the material life of the accessories
and bed.
1 2 . 5
|
C L E A N I N G T H E S T E A M
G E N E R A T O R
Recommended to be completed once a week:
To maintain and ensure that your unit’s steam generator and its
elements retain a long lifetime, it is necessary to flush the steam
generator at least once a week.
1.
Turn the system
ON
.
2.
Use arrow keys to move to and highlight
SERVICE
and press
ENT.
3.
Select
CLEAN HEATER
.
4.
Press right arrow key to turn
CLEAN HEATER
function
ON
.
5.
Wait. Cleaning process will take around 10 minutes, including
water boiling and drainage.
6.
Once it’s done, turn
CLEAN HEATER
function
OFF
.
1 2 . 6
|
T H E A R O M A S Y S T E M
Recommended to be completed nightly:
1.
Turn the system on by pressing the
On/Off
button located
at right side of head of system.
2.
Press Enter on the LCD panel to continue.
3.
Enter the service menu by using the directional arrows until
Service
feature is highlighted.
4.
Scroll down to Aroma Cup feature until highlighted.
5.
Press the right arrow key to open the Aroma Cup feature.
You may hear a faint clicking sound as drainage opens.
6.
All access aroma liquid from the tank will drain from the nipple
at the foot end of the unit. Ensure that the excess aroma liquid
is flowing from the nipple into drain pan before continuing to
step 7.
7.
Pour four (4) ounces hot water into the aroma tank reservoir
to remove any extra aroma liquid. This water will immediately
drain from blue nipple underneath the bed, check to ensure it
is draining out appropriately into drainage pan.
Note: This process can be completed with tap water.
S p a F e n g S h u i - P a g e 3 9
Owner’s Manual
SECTION 12 |
System Cleaning, Maintenance & Reinstallation
Spa Feng Shui Manual 809.qxp:DL_SFS_806 A4 NS 9/18/08 4:18 PM Page 44
