sy.uk
2
V1.0
The SY-HDBT-ARC100 Extender Set consists of a transmitter and receiver pair that can broadcast
4K UHD HDMI up to 100m or 1080p up to 150m. Bi-directional IR, RS232 and Ethernet are also
supported to permit the use of those control signals between the HDBT-ARC100 units. The
transmitter provides outputs for both Toslink (S/PDIF) and stereo analogue for audio and the
receiver has audio Toslink fibre input port.
This extender set can also use the HDMI audio return channel (ARC) from the display all the way
through back to the HDBT-ARC100-T transmitter where the audio can be sent to an amplifier using
either analogue stereo (L+R) or optical Toslink.
Features
HDMI 2.0 4K2K up to 100m or 1080p up to 150m
Max resolution: 4K2K @ 60Hz 4:2:0 - Supports 1080p 3D
Supports CEC and ARC
Support for HDMI 1.4 and HDCP 1.4 & 2.2
HDBaseT port provides PoC, so only one PSU is required to power both units
Bi-directional IR and RS232 control
Four-port Ethernet switch – 1 port on ARC100-T and 3 ports on ACR100-R
Status LEDs for Power, HDMI/HDCP mode, Link status and unit operating status
Panel Descriptions
Transmitter
Front
Name
Description
Service
Micro USB for Service use only
Power LED
Indicates that the unit is powered up
HDCP LED
OFF – No HDMI present
ON – HDMI present with HDCP
Flashing - HDMI present with no HDCP
LINK LED
OFF – No Link
ON – Link successful
Flashing – Failing to link successfully
ON LED
OFF – Unit is non-functional
Flashing – Unit is operating normally
MODE Switch
Use 100m for any resolution up to 4Kx2K
Use 150m for any resolution up to 1080p (4Kx2K not possible in this mode)
ARC Switch
Enables or Disabled the ARC (Audio Return Channel) feature
