31
V1.97
TROUBLESHOOT
Troubleshooting
Notice
Error
Solutions
No Atomizer
Detected
Not detecting coil
• Install an atomizer
• Check 510 connection
Check
Atomizer
Either the atomizer is not
connected. or the unit has
detected a problem
• Examine atomizer
Coil
Ω
Too High
Resistance is higher than
3.0
Ω
• Change to supported coil
Coil
Ω
Too Low
Resistance is lower than
0.05
Ω
• Change to supported coil
Atomizer
Short
The Atomizer is shorting
• Examine atomizer
• Examine coil
Charge
Battery
Batteries have 5% left
• Prepare to charge
batteries
Low
Battery
Batteries have 0% left
• Charge your Batteries
Device
Overheat
The internal board is
overheating
• Wait for it to cool down
• Contact support
Battery
Overload
Battery Overload Detected
(Calculated AMPS are higher
than configured CDR)
• Optional: Set your correct
battery CDR in MAIN-
MENU
→
TWEAKS
or shut it off.
Check
Battery
Batteries behave
abnormally
• Check batteries
• Replace batteries
Coil is not TC
Compatible
The coil/wire cannot be
used in Temp-Control Mode • Use supported TC wires
No
Liquid
Temp-Control Dry Hit
Protection
• Add liquid
• Check locked resistance
• Make sure to lock
Ω
at
room temp
Cut Off
Power is being cut off
• Check MAIN-
MENU
→
TWEAKS to adjust
cut off time
