SXblue Series User Manual
15
Figure 1-1 SXblue Series Main Components
The connections required by the SXblue receiver are very straightforward. All
cables necessary for complete operation are provided.
- The RS-232 port is a D-Sub 9-pin female connector (differs for SXblue 12/24
volts)
- The USB port is a Type-B female connector (not available for SXblue 12/24
volts)
- The Bluetooth port is a Class 1 type.
The SXblue receiver offers three (two for SXblue 12/24 volts) communication
options: Serial RS-232, USB (not available for SXblue 12/24 volts) and Bluetooth.
In order to use the USB port, a driver (available on our web site) must be installed
on your computer. Refer to section 1.3 for instructions on how to install the drivers.
In order to use the Bluetooth (wireless) communication of the SXblue receiver, you
must use a Bluetooth-enabled device or computer. If you have a device or
computer that does not support Bluetooth natively, you can supplement your
computing device with a Bluetooth card (CF, PCMCIA, SD) or USB dongle. When
configuring your Bluetooth device for communication with the SXblue receiver,
make sure that pairing (or bonding) with password (or passkey) is not activated. A
miniature DIP switch (see Figure 1-2) allows powering off the Bluetooth radio when
the receiver is operated in places where the use of wireless communication is
prohibited. Refer to section 1.3.2 for more information on sample Bluetooth setups.
Содержание iSXblue II+ GNSSTM
Страница 1: ...USER MANUAL WWW SXBLUEGPS COM...
Страница 74: ...SXblue Series User Manual 73...
Страница 84: ...SXblue Series User Manual 83 Appendices...
Страница 107: ...WWW SXBLUEGPS COM...