Q U I C K S T A R T
SX2 DualPRI V2
4
SX2 SinglePRI
PCM bus connection
The card has two 20-pole jacks for connection with an optional PCM cable.
The upper jack is the output. The lower jack is the input. Connect the SX2 cards with the
PCM cable, by connecting the output jack of an SX2card to the input jack of another SX2
card.
LED Status Display
The E1 connection of the SX2 SinglePRI has a status display consisting of two red and two
green LEDs.
The following assignments are valid:
LED
LED
Statement
1
off
Layer 1 deactivated
1
red glowing
Layer 1 activated
2
green glowing
Layer 2 activated
3
green, blinking
At least one connection is active
4
red, blinking
The line is being configured
PCM input
PCM output
•
Insertion of the ISDN Card
The insertion of the ISDN cards is nearly identical and therefore they are explained together
in this chapter.
After the card has been installed physically, it will automatically be recognized the next time
the computer is booted and a request for the installation of the driver software will appear.
You may find more recent drivers for the ISDN cards in the download area of the homepage:
http://www.swyx.com/support/index.html
Do the necessary hardware configuration before the insertion. Weitere Informationen
entnehmen Sie bitte der SwyxWare Administrator-Dokumentation.
It is absolutely necessary that you turn off the PC and remove the mains plug from the
power supply whenever you are doing something which requires you to open the PC case!
Do not touch any of the electronic components of the PC card during the entire installation
process. The electronic components of the PC card can be damaged by electrostatic
discharges!
For safety reasons, it is necessary that you disconnect all connection cables from the
telephone network before you open the PC case.
This is how you install the ISDN cards in your PC
1.
Turn off your PC and pull the respective mains plug out of the socket.
2.
3.
Remove the screw from the metal panel covering a free PCI (expansion) slot:
Image 2 Removing the Metal Panel
4.
Insert the ISDN PC card into a free PCI or PCI-X plug-in slot.
5.
Use the screw you just removed to secure the PC card.
Metal Panel
Expansion Slot
ISA
16-bit Expansion Slot
PCI /PCI-X
slot
Case
Back
