SwyxPhone L64 advanced Telephony Functions
Conference
100
3.
If you would like to end the call to the subscriber you made an
inquiry call to, put the handset on the hook or press the
corresponding Line button.
This is how you add an additional subscriber to a conference
You are a participant in a conference.
1.
Use the arrow buttons to select “Call Swap”.
2.
Dial the number you want.
3.
Once you have reached the new participant, select "Conference"
with the arrow buttons and press the "OK" button.
A welcome signal will be produced for all conference partici-
pants. A new subscriber has been added to the conference.
11.6.3 Leaving or Ending a Conference
To leave the conference, put the handset on the hook.
When going on hook, there are two different situations:
You started the conference.
In this case, the conference will be ended for all participants if you
put the handset on the hook.
Another subscriber started the conference.
Only you will leave the conference. A goodbye signal will be pro-
duced for all other subscribers and the remaining subscribers can
continue to speak to one another.
This is how you leave a conference
Another subscriber started the conference.
1.
Place the handset on the hook.
If one conference participant puts his conference line on “Hold” and then
returns to the conference, no welcome signal will be produced.
All those subscribers whom you added to this conference will leave the
conference with you. The conference will continue for all other subscrib-
ers.
If a subscriber leaves a conference, a goodbye signal will be
produced for all other subscribers.
This is how you end a conference
You have started a conference and the conference line has an “active”
state, i.e. you can speak to the other conference participants.
1.
Place the handset on the hook.
The conference is ended. The line becomes free again.
11.6.4 Conference Rooms
Conference rooms are set up by the administrator. A number is assigned
with which the conference room can be "entered". All subscribers can
dial the Conference Room and participate in a conference with other
users, who have dialed this number. All participants can leave the confer-
ence independently of one another, without the conference being termi-
nated. You can enter a Conference Room as a member of a conference
or purely as a listener.
This is how you reach a Conference Room
1.
Dial the number of this Conference Room.
You will be connected to the conference. All participants in the
conference room will hear a welcome signal.
If you are the only conference participant, an appropriate
announcement will be played.
2.
To leave the conference, simply go on hook.
All those present in the Conference Room will hear a goodbye
signal. The conference between the other subscribers continues to
exist.
You can also start Inquiry Calls from a Conference Room (see
you start an Inquiry Call from a conference
Furthermore, you can add other subscribers to this Conference Room
This is how you add an additional subscriber to a conference
If Subscriber A of the original conference added other subscribers, e.g. B
and C, to this conference, a second conference between A, B and C will
continue to exist until Subscriber A, as initiator of the second conference,
terminates the connection and thus ends the conference.
