Swyx SwyxConnect 1722, Руководство пользователя

Страница: 92 / 112

7-4 Which information is required?
7.1.3 Settings for IPX
Two IPX network numbers must be provided for remote access to an
IPX network:
• the IPX network number of the head office
• an additional IPX network number for the higher-level WAN
The required network numbers are designated as “External Network
Numbers”. Like IP network addresses, they apply to an entire LAN
segment. On the other hand, internal IPX numbers are used to address
specific Novell servers in the LAN. All three specified network
numbers must be distinct from one another and from all used internal
IPX network numbers.
In addition, it may be necessary to enter the frame type (“binding”).
Specifying the IPX network number and binding used is not
necessary if the remote network also contains a Novell server. A
network number for the WAN must also be entered manually in this
case, however.
7.1.4 Settings for NetBIOS routing
All that is required to use NetBIOS is the name of a Windows
workgroup from the router's own LAN.
The connection is not established automatically. The RAS user must
manually establish a connection to the SwyxConnect via Dial-Up
Networking first. When connected, they can search for and access
computers in the remote network (via
Find Computer s, not through
the Network Neighbourhood).
LAN of the head office
IPX network no.: 00000001, Binding: Ethernet_II
(0123) 123456
WAN
IPX network no.:
00000009
IPX internal net:
00020002
Remote
workstation
ISDN adapter
User: 'SAMPLE'
(0123) 777888
VPN or ISDN
connection