2
ELECTRIC ROLLER GARAGE DOOR COMPONENTS
1a OPTIONAL 90 DEGREE FASCIA
1b OPTIONAL 45 DEGREE LID
2
MOTOR (fitted into axle)
3
102mm ROUND AXLE
4
LOCKING COLLARS (fitted to axle 6 No. up to 2.5m, 8 No. up to 3.5m
10 No.over 3.5m)
5
DUMMY END or SPRING
6
6 x No. 8 x 3⁄8 PAN HEAD SCREWS * (for securing octagonal fixing plates
in mounting bracket, see component 7)
7
DUMMY END OCTAGONAL FIXING PLATE (secured to shaft by split
pin - see component 29)
8
MOTOR OCTAGONAL FIXING PLATE (bolted to motor)
9
ATTACHMENT/LOCKING ARM (1 No. L/H 1 No. R/H complete with
locking bolt and lock nut, 1 - 3 No. intermediate)
10 R/H END PLATE
11 L/H END PLATE
12 GUIDE ROLLER (fitted to end plates with star clinch lock washer)
13 MOUNTING BRACKET (fitted to end plates)
14 GUIDE
RAILS
15 BRUSH INSERT (fitted to guides)
16 CURTAIN
17 TOP SLAT (fitted to door curtain)
18 POLYESTER WEBBING STRIP (fitted to curtain)
19 8 x 1/2 FLANGE HEAD SELF TAPPING SCREW (securing webbing to curtain)
20 BOTTOM SLAT (fitted to curtain)
21 RUBBER SEAL (fitted to bottom slat)
22 RIGID OVERRIDE EYE (inc. allan cap screw & washer) or DROP EYE
JOINT (if 350mm end plates are required) *
23 CRANK
HANDLE
24 STOP BLOCKS * (for fitting to bottom slat)
25 2 No. M6 NUTS (inserted in bottom slat for securing stop blocks)
26 2 No. M6 X 30 BOLTS * (for fixing stop blocks)
27 7 No. 4.8mm x 9.3mm x 12mm POP RIVETS
* (for securing axle collars)
27b 3 No. 8 x 1/2 FLANGE HEAD SELF TAPPING SCREWS
* (for securing webbing strips to curtain)
28 CRANK HANDLE CLIP *
29 1 x 60mm SPLIT PIN (to secure the octagonal fixing plate to the dummy
end/ spring shaft)
30 3 x CABLE TIES * (for securing motor cable to end plate)
* Supplied in accessory pack.
Recommended Fixings (not supplied)
12 x 1” Self Tapping Screws for Steel
12 x 2 1⁄2” Countersunk Screws for Masonry and Wood
1. Axle, guides, crank handles, facias (if the door is 3.5m wide or
greater) and if applicable the external override kit will be wrapped
together in one bubble wrapped parcel and strapped together.
2. The curtain and aluminium facias (if the door is less than 3.5m
wide) will be packed together.
3. A separate accessories box is packed with the installation and
end user instructions, the two end plates, the attachment /locking
arms, the accessory pack and a box containing the electrical items.
PACKAGING METHOD:
2
4
3
8
11
13
14
9
18
19
15
20
23
24
25
21
12
10
7
5
6
28
29
27
26
30
16
17
22
1b
22
1a
www.samsondoors.co.uk
0800 328 6250
www.samsondoors.co.uk
www.samsondoors.co.uk
0800 328 6250
www.samsondoors.co.uk
