SWR BASS 350 USER GUIDE
INTRODUCTION
The SWR Bass 350 Bass Amplifier was designed for the player who
prefers a simple and straightfor ward preamp combined with a power
amp capable of delivering enough power and headroom for most live
applications. The Bass 350 maintains the same quality components
and materials found in all SWR products and is assembled by hand at
our factor y in California.
The two preamp gain stages utilize a specially-selected Groove Tubes
12AX7A. The tone controls incorporate ICs and the power amp is
designed with ver y high quality bi-polar devices. Each type of device
was chosen for its per formance and reliability in the application used.
The front panel of the Bass 350 is chromed steel, while aluminum is
used for the main chassis because of its superior electrical and ther-
mal characteristics and light weight. All primar y electrical components
are U.L. approved and SWR uses Belden Cable for all shielded wire.
Ever yone at SWR sincerely hopes that the purchase of our product
adds to the enjoyment of your playing and that it lives up to all your
expectations and more!
Sincerely,
SWR
1
BASS 350 USER GUIDE
