cabinet that you are plugging in is NOT LESS THAN FOUR (4) OHMS. Use a good quality speaker cable that is at least 18
gauge or heavier (the lower the gauge, the heavier the wire). DO NOT USE INSTRUMENT CABLE FOR HOOKING UP
SPEAKERS!!
EXTENSION SPEAKER JACK
The Extension Speaker jack can be used to plug in a second set of speakers. If you use this feature, make sure that the
impedance of the cabinet that you are plugging in is NOT LESS THAN FOUR (4) OHMS. Use a good quality speaker cable
that is at least 18 gauge or heavier (the lower the gauge, the heavier the wire). DO NOT USE INSTRUMENT CABLE FOR
HOOKING UP SPEAKERS!!
SPEAKER FUSE
This feature is provided to protect your speakers in the unlikely event of a power amp failure or your power amp from bad
speakers or their respective cables. This fuse can open (blow) if your amp is on and you are playing while plugging in the
internal speakers or an extension speaker cabinet. This is because the power amp is momentarily shorted out to ground.
Always check this fuse first if no sound is coming from your cabinet(s). Correct size and rating of the speaker fuse is: 3AG,
6 amp, fast blow.
A/C LINE FUSE
The line fuse can open (blow) due to power surges or high powerline transients. This fuse will also open in the event of an
electronics failure inside your amplifier.
Correct size and rating of the Line (Mains) fuse is 3AG, 3 amp slo blo for 120V operation and 1 1/2 amp slo blo for 240V
operation.
DO NOT DEFEAT THE PURPOSE OF THIS FEATURE BY USING A FUSE WITH A HIGHER RATING. IT CAN FURTHER DAMAGE
YOUR AMP AND VOID YOUR WARRANTY.
