Operating instructions
5
4. Safety
The ProGap was designed, built and tested to be safe and was shipped in safe condition.
Nevertheless persons or objects may be endangered by components of the system if these are operated in an
inexpert manner. Therefore the operational instructions must be read completely and the safety notes must be
followed.
In case of inexpert or irregular use, the manufacturer will refuse any liability or guarantee.
4.1 Regular Use
•
Only original spare parts and accessories of SWR engineering must be used.
4.2 Identification of Dangers
•
In the manual it is pointed out to possible dangers with the use of the microwave barrier.
4.3 Operational Safety
•
The microwave barrier must be installed by trained and authorised personnel only.
•
In case of maintenance-work on the pipe or on components of the ProGap-sensor, make sure that the
piping is in unpressurized condition.
•
Switch off the supply voltage for all maintenance, cleaning or inspection works on the tubes.
•
Before sweat works the microwave barrier must be removed.
•
The components and electrical connections must be checked for damages regularly. If a damage is
found, it is to be repaired before further operation of the instruments.
4.4 Technical Progress
•
The manufacturer reserves the right to adapt technical data to the technical progress without particular
advance notice. If you have any questions, SWR engineering will be pleased to inform you on possible
changes and extensions of the operating instructions.
