16
ZOOM INDICATOR: When you tap this icon on the screen, the monitor breaks the screen image
into 5 areas. Tap the area you want to see in Zoom. That area displays in 2X size. Tap the icon
again to exit Zoom mode.
VOLUME INDICATOR: Indicates current audio volume. You must be in sigle channel viewing
mode to change volume. Tap + or - to raise or lower the volume. displays when the volume is off
(mute).
TALK BACK INDICATOR: Displays when TALK is pressed. Press and hold TALK on the side of the
monitor to talk back through the camera. Release TALK to wait for a reply.
NEW DOWNLOAD: Displays if new firmware is available.
SEQUENCE INDICATOR: Displays when the monitor is in auto switch mode; it will change
channels automatically.
CHANGE CHANNEL: Tap this icon to manually change channels.
MOTION RECORDING INDICATOR: Indicates motion detection status.
Blue - Automatic recording OFF.
Red - Automatic recording ON.
POP-UP MENU TAB: Tap to access the pop up menu system.
FUNCTIONS
Tap
and the pop-up menus display.
Light settings
Turn on the LED light manually, create a schedule for automatic power on / off, and adjust the brightness of
the LED light.
1 Tap .
2 You have the following options:
• Tap the number corresponding to the camera to manually turn the light on or off.
• Tap "Duration" and set how long the light should be switched on after the movement has been trigge-
red. You can turn off the light or set it to 1/3/10 min.
• Tap "Timer" and specify a schedule for which the light should be switched on.
• Touch "Dimmer" and adjust the brightness of the LED lamp.
ALARM
When motion triggers the camera to begin recording, the monitor sounds an alarm tone. This screen lets
you determine how loud that tone will be.
1 Tap .
2 Tap + or – to increase or decrease the alarm volume. Tap when you are finished.
BRIGHTNESS
This feature allows you to set each camera’s brightness level.
1 Tap .
2 Tap + or – to increase or decrease the monitor screen brightness. Tap when you are finished.