24
18
Key function assignment for remote access
The following table provides an overview of the functions assigned to the individual buttons.
Button
Functions
when no messages are
being played
Functions when messages are
being played
Play the previous message
Play message again
Play messages
Resume playback
Play the next message
Pause
Stop playback
Switch the answering machine on/off
Delete current message
End remote access
End remote access
12
In Case of Problems
Service Hotline
Should problems arise with the telephone, please refer to the following information first. In the
case of technical problems, you can contact our hotline service, Tel. 0900 00 1675 within
Switzerland (Swisscom fees at time of going to print: CHF 2.60/min). In the case of claims
under the terms of guarantee, please contact your sales outlet. There is a 2 year period of
guarantee.
Problems and solutions
Problems
Solutions
No connection to base station
possible
−
Check that the handset has been registered on the
base station with the correct PIN code;
No telephone calls possible
−
The telephone is not connected properly or is defec-
tive. Only use the telephone connection cable supplied.
−
Test whether the telephone connection is in order by
using another telephone.
−
The power adaptor plug is not plugged in or there is a
complete power failure.
−
The rechargeable batteries are empty or defective.
−
The handset is too far from the base station.
−
The wrong dialling mode is set;
Connection is disturbed or cut off
−
The handset is too far from the base station.
−
The base station is in an unsuitable location.
