switel DFT9271, Руководство по эксплуатации, Страница: 4 / 28

2
Preparing the Telephone
4
Charging the batteries
Before the handset is used for the first time, insert it in the base station / charging
station for
at least 14 hours.
When the handset is inserted in the base/charging station properly, you will hear an acoustic
confirmation signal and the charge control lamp lights up. The handset warms up during the
charging process. This is normal and does not represent a risk. Do not charge the handset
with charging units from other manufacturers.
The current
battery charge status is indicated in the display:
Full Half empty Low Empty
Setting the display language
Select a language (cf. Menu Structure"):
> PERS. EINST > SPRACHE > ... ( > PERSONAL SET > LANGUAGE >...)
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 14 for the sequence of menu option
selections.
Auto answer / Auto hang−up
If this feature is enabled, the telephone automatically takes a call when the handset is re-
moved from the base station and automatically ends the call when it is put back in the base
station. Use the menu to activate or deactivate these functions. Refer to Page 16 for the se-
quence of menu option selections.
Private branch exchanges
The information on Page 17 explains how to install your telephone in a private branch ex-
change.
Low−radiation operation (ECO mode)
The level of radiation is considerably lower than that of standard DECT cordless
telephones when in Standby mode (when the handset is on the base station).
In talk mode, radiation is reduced (depending on the distance between the
handset and base station).
Default setting = ECO MODE
→
OFF
The telephone can be set up so that the radiation frequency is reduced; Page 16.
If necessary, you can increase the range of the telephone system by switching
ECO mode off;
Page 16 (ECO MODE
→
OFF).