switel DFT157x, Руководство по эксплуатации, Страница: 5 / 28

2
Preparing the Telephone
5
Charging the batteries
Before the handset is used for the first time, insert it in the base/charging station
for
at least 15 hours.
When the handset is properly inserted in the base station / charging station, you will hear an
acoustic signal. The handset warms up during the charging process. This is normal and
does not represent a risk. Do not charge the handset with charging units from other manu-
facturers.
The current
battery charge status is indicated in the display:
Full Half empty Low Empty
Setup mode
When you first start up and after every reset, the unit will be in setup mode. Follow the in-
structions displayed to choose a country and language and to set the date and time.
WELCOME
G
Start Setup
SET COUNTRY
K
/
L
Select a country
G
, CONFIRM?
G
Confirm
WAITING...
SET LANGUAGE
K
/
L
Select a language
G
Confirm
Set Date
Ë G
Set date and confirm
SET TIME
Ë G
Set time and confirm
In setup mode, the language of display texts will change as you select a country.
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 14 for the sequence of menu option
selections. If AUTO CLOCK ADJ is enabled, the CLIP function will automatically receive
and update both date and time.
Automatic answering (Auto answer)
If this function is activated, an incoming call is taken when the handset is removed from the
base/charging station. Use the menu to activate or deactivate this function. Refer to
Page 14 for the sequence of menu option selections.
Private branch exchanges
The information on Page 16 explains how to install your telephone in a private branch ex-
change.
Low−radiation operation (ECO mode)
The level of radiation is considerably lower than that of standard DECT cordless
telephones when in Standby mode (when the handset is in the charging station).
In talk mode, radiation is reduced (depending on the distance between
the handset and base station).