21
Page
Version 1.1 March 2021
Step 15: Take the two 16mm screws and thread them through the lock blocks on the right side of the bottom
box (Part I) as shown.
Step 16: Take the Solar Bracket (Part R) and screw in the Joiner (Part N) and Box Plug (Part M) assembly.
Again, don’t screw it all in, just until it’s snug and oriented correctly as shown below. The wire channel on the
Box Plug (Part M) should be pointed down while the panel should up be at 45 degrees. You can use a drop of
glue if the threads don’t hold. This forms the Solar Bracket Assembly.
