SwitchDoc Labs SkyWeather WXLink, Руководство по сборке и испытаниям, Страница: 9 / 31

Version 1.2 May 2019
Page 7
SkyWeather Solar WXLink LoRa Kit
The issue is sometimes you don't want to run a wire all the way from the Weather Station to the wind and rain
sensor. Using the Mini Pro LP, we built a WeatherRack reader and then we use a transmitter to send it back to
the SkyWeather station inside. We then added solar power to the system.
The Solar WXLink LoRa SkyWeather product kit contains one Mini Pro LP Arduino board, a WXLinkWR
Weather Rack Interface board, two LoRa transceivers, SunAirPlus Solar Power Controller and Data Collector,
and a 330mA 6V Solar Cell..
The SkyWeather Solar WXLink Kit is a solar powered wireless serial link that can transmit up to 6000 meters
in free air, with the proper antenna (like our Yagi Antenna product). It is designed to connect up to any source
of data from sensors connected to the Mini Pro LP Arduino compatible low power computer board. It was
specifically designed to connect a WeatherRack weather sensor array to a SKyWeather based system connected
to a Raspberry Pi computer. And yes, it has Grove connectors throughout the system. The WXLink LoRa
comes preloaded with the software to support a WeatherRack and AM2315. See below for the source code. No
soldering required.