SWIT S-1093F, Руководство пользователя, Страница: 16 / 21

16
12. System
*1 Source Scan
When set to “Yes”, after turn on the monitor, the signal will be inspected and follow the sequence of
“SDI1→SDI2→HDMI→CVBS”.
For example: if channel is selected to SDI2, SDI-IN2 has no input, and CVBS has input. When turn
on the monitor, after automatic inspection, SDI2 has no recognized signal, and CVBS has
recognized signal, then the input signal will be CVBS.
When set to “No”, update model will not be supported.
*2 Logo
When powered on, the screen will display SWIT logo.
*3
、
*4 Update Driver/ Kernel
DT-X92F supports USB software upgrade. Insert the USB equipment with update software into the
back panel USB socket. Set “Update Driver” and “Update Kernel” to “Yes” under “System”
Submenu, press “MENU/ENTER” to apply. During the update procedure, please do not power off
to make sure the software writing has been successfully completed.
13. OSD
14. Key Inhibit
If the “Key Inhibit” is “On”, there is no response when all the buttons expert ” MENU/ENTER” are
pressed, the sreen will be displayed as ” Key Inhibit”.