2. Panel Instruction
Front view
⑴
Speaker
：
：
：
：
Monitor HDMI and SDI audio (speaker will automatically mute when 6.35mm outputs
)
⑵
MENU
：
：
：
：
Press to enter Menu system
⑶
SOURCE:
Input signal selection
Press “SOURCE” and revolve the “ENTER” to select the input video signal.
⑷
A_WFM*
：
：
：
：
Press to switch on the loudness waveform on the current activated window.
⑸
LISSAJOUS*:
Press to switch on the audio Lissajous pattern on the current activated window.
⑹
A-BAR*:
Press to switch on the VU/PPM and Loudness meters on the current activated window.
⑺
A_HIST*
：
：
：
：
Press to switch on the loudness histogram display on the current activated window.
⑻
~
⑾
WINDOW1~4
：
：
：
：
Select corresponding window as the current activated window
⑿
PHONE
：
6.35mm Earphone socket, for SDI and HDMI embedded audio monitoring
⒀
POWER
：
：
：
：
Power on/off
Connect with power cable, press the “POWER” to switch on the monitor. Press again to switch off.
Disconnect with power cable if the monitor will not be used for a period of time.
⒁
FULL_DISP
：
：
：
：
Press “FULL_DISP” to switch between Full screen display mode and quad-split display mode
⒂
TIME_RST
：
：
：
：
Time reset
Press “TIME_RST” and revolve “ENTER” to select “YES” or “NO” and press “ENTER” to confirm.
Select “YES” to reset all times and recount Loudness.
⒃
TIME_SEL
：
：
：
：
Time select
Press “TIME_SEL” and revolve “ENTER” to select corresponding
time scale and press “ENTER” to confirm.
⒄
VIDEO*
：
：
：
：
Press “VIDEO” to display SDI/HDMI video on the current
activated window.
⒅
F1
：
：
：
：
User definable function key
⒆
ENTER:
Select and Apply
Under menu system, revolve “ENTER” knob to adjust settings and press to apply; and out of
menu system, directly revolve “ENTER” to adjust volume.
⒇
TALLY Light:
Red, Green and Yellow 3-color TALLY indicator
*
Press
WINDOW1~4
to select the current activated window, then press
A_WFM
or
LISSAJOUS
or
A-BAR
or
A_HIST
or
VIDEO
to display on the current activated window.