Receiver FLOW2000
⑴
Antenna
⑵
ON/OFF
：Power switch
⑶
USB
：Micro USB, software upgrade interface
⑷
Link
：Wireless status indicator
⑸
Video
：Video signal indicator
⑹
Power
：Power status indicator
⑺
DC in
：Support DC 7-34V voltage input, 5.5mm (outer diameter) /2.1mm (inner diameter).
Outside: negative, Inside: positive
⑻
OLED
：0.96-inch OLED
⑼
Five-direction switch
：Five-direction adjustment button. (adjust the display menu to switch and con
firm in five directions up, down, left, right, and vertical)
⑽
Installation thread
：1/4
”
-20 thread, Use the package supplied articulating arm trestle to install the
device to the camera
⑾
HDMI OUT
: HDMI output (HDMI-A type connector)
⑿
SDI out
: SDI output (BNC connector)
⒀
Battery plate
：
“ F ” plates can be used. We recommend SWIT batteries like: S-8972, S-8970, S-8770,
S-8975 compatible with SONY “ L” series NP-F770/970.
Status
Constant On
Off
Constant On
Flash
Constant On
Flash
Description
Power connected and switched on
Power disconnected and switched off
There is recognizable video signal input
There is no recognizable video signal input
The wireless network connection is normal
The wireless network connection is abnormal
Device
FLOW2000
Receiver
LED indicator
Power
Video
Link
The description of LED status indicator
(1)
(6)
(7)
(5)
(2)
(8)
(11)
(9)
(12)
(10)
(13)
(4)
(3)
