8. Audio
*1
When “Bar Frame” is set to “Off”, only the audio meter will be displayed.
When “Bar Frame” is set to “On”, frame and real-time audio value will be displayed.
*2
Select Channel
Under HDMI signal, channel1-2 can be selected.
Under SDI signal, channel 1-2, 1-8 and 1-16 can be selected.
*3
When “Audio Alarm” is set to “On”, if no embedded audio is detected, the audio bar will display
“UNLOCKED”. If the audio value is too low, the audio bar will display “MUTE”.
*4
Audio channels can be selected to output according to the requirements.
When the current “Select Channel” is set to “Channel1-2”, the left channel and right channel
output can be selected from Channel1 or channel 2.
When the current “Select Channel” is set to “Channel1-8”, the left channel and right channel
output can be selected from Channel1 to channel 8.
When the current “Select Channel” is set to “Channel1-16”, the left channel and right channel
output can be selected from Channel1 to channel 16.
In audio bar, the left channel information will be in green, and the right channel information will
be in red.
Channel 1～2 Channel 1～8 Channel 1～16
Audio
Exit
Audio Bar
Bar Frame
Bar Position
Bar Blending
Select Channel
Audio Alarm
Left Channel
Right Channel
Off,On
Off,On
Top Right,Bottom Left,Bottom Right,Top Left
Low,Off,High
Channel 1-2,1-8,1-16
Off,On
CH1-CH16,CH1
CH1-CH16,CH2
*1
*2
*3
*4
13
