9. Trouble shooting
10. Specification
If the receiver failed to output video correctly, the possible causes are as below; please find the solution
from following chart:
The receiving
video
No display
Poor
Video quality
Possible causes
The transmitter receiver is
not powered on
The antennas are not installed
properly and screwed tightly
Bad connection of video cable
Video format is not supported
Bad connection with video cable
The wireless transmission is
disturbed by environment
The transmission distance is out of
effective range
Solution
Check power connection and switch on
the transmitter and receiver
Install the antennas properly and screw
tightly of both transmitter and receiver
Check video cable connection of both
transmitter and receiver
Change the output video format of the
camera
Reconnect reliably
Wait for 1 minute or reboot the transmitter
and receiver
Close the transmitter to the receiver
Model
Input
Output
Video format
Wireless frequency
modulation mode
transmission distance
Power consumption
Transmitting power
Human‒Machine Interaction
Input voltage
Working environment
Dimension
(without antenna and plate)
Net weight (without antenna)
FLOW500T Transmitter
FLOW500R Receiver
SDI×1、HDMI×1
SDI×1
1080I（60/59.94/50）/1080PsF（24/23.98）/720P（60/59.94/50)/1080P
（60/59.94/50/30/29.97/25/24/23.98）
5.17GHz-5.23GHz and 5.75GHz-5.83GHz
OFDM Support 16QAM, 64QAM, QPSK, BPSK modulation mode
150m（Line of sight）
≤8W
Max CE:25mW FCC:50mW
0.96-inch OLED, Five-direction adjustment button
DC/ Battery：7～34V
Temperature ：0℃~+40℃
66×106.5×24.7（mm）
240.0g
/
HDMI×1、SDI×2
≤8W
/
106.5×66×24.7（mm）
230.0g
