Swissvoice Eurit 748, Руководство пользователя, Страница: 32 / 80

30
20404916en_ba_b0
Telephoning
Internal enquiry call
You are conducting an external call and want to call an internal party without ending
the external call.
1. Press
Int
.
2. Dial the desired handset number and press OK to confirm. The external call is put on hold.
If the second handset answers, you can talk to the internal call partner without the
external caller hearing you.
You can switch between the two call parties or connect all three calls into a 3-party-
conference. Refer to chapter “Brokering” and “Conference calls“ for more details.
Note • You cannot use the
Int
key if the call duration is not displayed.
• If the second handset does not answer, you can end the ringing signal and
return to the original call by pressing the softkey under END .
• Internal enquiries are managed by the base station and are not dependent
on your network operator’s available services.
Brokering (switching between two calls)
You have two active calls (1 internal and 1 external), one of which is on hold.
1. Press the key
Int
or the softkey under OPTIONS , BROKERING to switch between
the call partners. Press the softkey under OPTIONS , CONFERENCE to connect all three
call partners with each other.
2. Press to end one of the calls. The remaining call partners are automatically
connected with each other.
Note Brokering between two external call partners is managed by the public
telephone network and is therefore dependent on your network operator’s
available services (network functions). Find out whether these network
functions are supported.