ePure TAM 2nd generation
22
ePure TAM 2nd generation
Remote operation from an external telephone
You can remote access your answer machine from any
telephone with DTMF or multifrequency dialling function.
●
Dial your number.
●
Press # when you hear your outgoing message. The
outgoing message is interrupted.
●
Enter your PIN code (0000 on delivery). If the PIN is correct
you will hear a confirmation tone.
●
You can now perform a number of functions by entering the
relevant digits (see the following table):
Key Function
1
Return to previous message
2
Play all messages
3
Skip to next message
6
Delete message during playback
7
Switch answer machine on
8 Stop
playback
9
Switch answer machine off
Help
No dial tone
●
Use only the telephone line cord supplied.
●
Check that the telephone line cord is connected properly.
●
Check that the mains power is connected properly and
switched on.
No display
●
Check that the batteries are inserted correctly and fully
charged. Use only approved rechargeable batteries
supplied.
●
Check that the handset is switched on. Press and hold the
End Call key .
●
Reset the base by removing the batteries and
disconnecting the mains power. Wait for around
15 seconds before connecting it again. Allow up to one
minute for the handset and base to synchronize.
icon flashes
●
Handset is out of range. Move closer to the base.