Swissvoice Aeris 246, Руководство пользователя, Страница: 56 / 92

54
20405527en_ba_a0
Inserting the two rechargeable batteries (note the polarity!):
Insert the batteries in the battery compartment. Make sure the polarity is correct. Insert
the batteries so that the flat end (negative polarity) of the battery is pressing against the
spring. The handset will not function if the batteries are incorrectly inserted. This may
result in damage. Replace the compartment cover by placing it approximately 3 mm off-
set and slide it upwards until it clicks into place.
Charging the batteries
The batteries are not yet charged when you first unpack the telephone. Insert the hand-
set in the base station for charging. The flashing battery symbol on the
handset shows the charging status. The batteries will take around 14 hours to fully charge
(initial charge).
Do not insert the handset in the base station without batteries.
Setting up the telephone
Removing the battery
compartment cover:
Slide the battery compartment
cover upwards (approx.3 mm) and
lift.
Safety note
Use only approved rechargeable
batteries: NiMH AAA 600 mAh.